Extended hydraulic line number 24

line 24, ref 54347025598.

New product

New, Extended Hydraulic Line # 24 for 2000-2006 BMW E46 convertibles.

Extended version of the OEM hose, which greatly reduces labor needed to replace and  eliminates the same manufacturing/design error seen with this hose originally in your 3-Series Convertible. Only available from Top Hydraulics.

$199.99

-+

This line goes from the valve block on the left side to the right main drive cylinder. Normally, line 23 is the first one to fail, which is a common failure in E46 convertibles. Top Hydraulics ships an EXTENDED LINE, which will save you many hours of labor upon installation. Hose material and fittings made in Germany; hose assembled and manufactured in the US. Please see the detailed DIY guide for line replacement in our DIY section - it shows you how you can save a lot of time in replacing this hose, plus install a product that is far less likely to break again (the guide is for line 23, but line 24 runs parallel to line 24 and it takes the same steps to install).

Lines 23 and 24 go from the valve block (aka solenoid block or hydraulic unit) to the right main lift cylinder, and they are routed close to each other. Each is secured to the valve block by a retaining disc. Line 23 connects to the upper retaining disc, and line 24 connects to the lower one. The retaining discs have numbers engraved on them that match the hydraulic lines they are holding in place.

Related Products